High Shear Mixers
Looking to break down particle agglomerates for a fine dispersion, the IMC Dispersers are the solution for viscous dispersions, most often used for applications up to 50,000 centipoise (cP). These Dispersers have all the standard features needed for efficient and economic operation. They are simple in design yet rugged and proved in heavy-duty applications with motor specifications rated at 10 HP for every 100 gallons of product. IMC dispersers are available with variable speed, mechanical or electronic drives. Every high shear mixer is manufactured entirely in the US and can be customized for your application. With our IMC blade factory, we can accommodate variations in the batch size for practically any industry solid-liquid mixing requirement.
- High Shear High Speed
- Low Shear
- Rotor-Stator
- Rushton and Radial Turbine
- .75 to 4 HP Lab Units
- Pilot Units - Post Mount
- Blade Holding Plates
- Bracket
- Couplings
- Dispersion Blade Adapter Shaft
- Stainless Steel Shaft
- 3 Blade
- 4 Blade
- Angle Slot
- Emulser
- General Purpose
- HDF
- High Efficiency
- HSC
- HSF
- HSG
- Hydrofoil
- Radial Flow
- Split Hub 2 Piece
- UHSF
- Bracket Mount
- Bung Entering
- Clamp Mount
- Drum Lid
- Flange
- Heavy Duty Ring Mount
- IBC Tote Lid
- Plate
- Post
- Ring Mount
- Toggle Clamp
- Tri-Clamp
- 0.25
- 0.33
- 0.5
- 0.75
- 1
- 1.5
- 10
- 2
- 3
- 4
- 5
- 7.5
- No
- Yes
- No
- Yes
- Air
- ODP
- TEFC
- XP-TEFC
- .625"
- 0-2.5
- 0.25 in
- 0.312 in.
- 0.375 in.
- 0.5 in.
- 0.75"
- 1.25"
- 1.5"
- 1.63"
- 1"
- 2.5"
- 2"
- 304 SS
- 316 SS
- Carbon Steel
- 2 Blade Propeller
- 3 Blade Axial
- Angled Slot Rotor Stator
- BBO
- HSF
- Propeller
- VHE
- 304 SS
- 316 SS
- 319-Al
- 1.5"
- 10"
- 100"
- 11"
- 12"
- 13"
- 14"
- 15"
- 16"
- 17"
- 18"
- 19 in
- 2.5"
- 2"
- 20"
- 21"
- 22"
- 23 in
- 24"
- 25 in
- 26"
- 27 in
- 28"
- 29 in.
- 3.5"
- 3"
- 30"
- 32"
- 34"
- 36"
- 38"
- 4.5"
- 4"
- 40"
- 44"
- 45"
- 48"
- 5.5"
- 5"
- 50"
- 52"
- 6 in.
- 6"
- 60"
- 7"
- 70"
- 8"
- 80"
- 9"
- 90"
- Bolt On
- Keyed w. Set Screws
- Set Screw
- 1
- 2
- 3
- 4
- Cl1-Div1-GrC,D
- IC411
- IP54
- IP55
- IP65
- IP65 Stainless
- N/A
- Stainless Steel
- Steel
- 0.25"
- 0.5"
- 0.625"
- Customer Specified
- 10 Gal
- 105 Gal
- 130 Gal
- 158 Gal
- 1600 Gal
- 165 Gal
- 18 Gal
- 20 Gal
- 225 Gal
- 230 Gal
- 250 Gal
- 30 Gal
- 310 Gal
- 38 Gal
- 410 Gal
- 460 Gal
- 5 Gal
- 525 Gal
- 60 Gal
- 610 Gal
- 740 Gal
- 810 Gal
- 85 Gal
- Cone
- Cone Bottom
- Flanged and Dished
- Flat
- Slope
- Slope Bottom
- 1-1/2" flush ball valve
- 1.5" Sanitary Drain
- 2" FNPT
- 3/4" Flush Valve Ferrule
- Flush with Bottom 2" FNPT
- Flush with Bottom 3" FNPT
- 1
- 3
- 1"
- 1/2"
- 3/4"
- 3/8"
- 5/8"
- 1"
- 1/2"
- 1/4"
- 3/4"
- 3/8"
- 5/16"
- 5/8"
1.5HP IMC-B Air Motor High Speed Disperser, Supports Up To 20 GAL Containers, Air Lift
1.5HP IMC-B Electric TEFC High Speed Disperser, Supports Up To 20 Gal Containers, Air Lift
10HP IMC-C Electric Explosion Proof High Speed Disperser, Supports Up To 55 Gal, Air Lift
10HP IMC-C Electric TEFC High Speed Disperser, Supports Up To 55 Gal, Air Lift
1HP IMC-B Electric TEFC High Speed Disperser, Supports Up To 20 GAL Containers, Air Lift
The new IMC-B line of pilot mount disperser is the most reliable in the industry for containers between 5-20 gallons. Look no further! The new IMC-B models have been developed for this specific volume. Our customers enjoy the fact that they now have a cost-effective option between a Lab unit and a large floor mount disperser. The new IMC-B line offers a 24” lift to allow operators to move the high shear dispersion blade in and out of the mix. Additionally, the bolt on blade attachment allows operators to change between blades easily and rapidly. All electric motor models include a variable speed controller (VFD) and can be optioned to an explosion proof variation. Standard units in the IMC-B line of dispersers operate between 0 and 5000 rpm. Air motor models will include a speed control valve, and muffler. The air lift system utilizes a 3-way air valve that allows to move the dispersion blade to any position. The speed is controlled by a keypad that includes an RPM read out to maximize efficiency. Options available are, Keypad extension for remote installation, container safe holding system, faster speeds, or higher torque configurations. Industrial Mixers and Controls has been proudly serving the coatings, chemicals, inks, adhesives, pharmaceuticals, foods, and cosmetics industries since 1968. Please contact our Sales Engineer Team if you have any questions (973-278-8776)