Bracket Mount
- High Shear High Speed
- Low Shear
- Rotor-Stator
- Rushton and Radial Turbine
- .75 to 4 HP Lab Units
- Pilot Units - Post Mount
- Blade Holding Plates
- Bracket
- Couplings
- Dispersion Blade Adapter Shaft
- Stainless Steel Shaft
- 3 Blade
- 4 Blade
- Angle Slot
- Emulser
- General Purpose
- HDF
- High Efficiency
- HSC
- HSF
- HSG
- Hydrofoil
- Radial Flow
- Split Hub 2 Piece
- UHSF
- Bracket Mount
- Bung Entering
- Clamp Mount
- Drum Lid
- Flange
- Heavy Duty Ring Mount
- IBC Tote Lid
- Plate
- Post
- Ring Mount
- Toggle Clamp
- Tri-Clamp
- 0.25
- 0.33
- 0.5
- 0.75
- 1
- 1.5
- 10
- 2
- 3
- 4
- 5
- 7.5
- No
- Yes
- No
- Yes
- Air
- ODP
- TEFC
- XP-TEFC
- .625"
- 0-2.5
- 0.25 in
- 0.312 in.
- 0.375 in.
- 0.5 in.
- 0.75"
- 1.25"
- 1.5"
- 1.63"
- 1"
- 2.5"
- 2"
- 304 SS
- 316 SS
- Carbon Steel
- 2 Blade Propeller
- 3 Blade Axial
- Angled Slot Rotor Stator
- BBO
- HSF
- Propeller
- VHE
- 304 SS
- 316 SS
- 319-Al
- 1.5"
- 10"
- 100"
- 11"
- 12"
- 13"
- 14"
- 15"
- 16"
- 17"
- 18"
- 19 in
- 2.5"
- 2"
- 20"
- 21"
- 22"
- 23 in
- 24"
- 25 in
- 26"
- 27 in
- 28"
- 29 in.
- 3.5"
- 3"
- 30"
- 32"
- 34"
- 36"
- 38"
- 4.5"
- 4"
- 40"
- 44"
- 45"
- 48"
- 5.5"
- 5"
- 50"
- 52"
- 6 in.
- 6"
- 60"
- 7"
- 70"
- 8"
- 80"
- 9"
- 90"
- Bolt On
- Keyed w. Set Screws
- Set Screw
- 1
- 2
- 3
- 4
- Cl1-Div1-GrC,D
- IC411
- IP54
- IP55
- IP65
- IP65 Stainless
- N/A
- Stainless Steel
- Steel
- 0.25"
- 0.5"
- 0.625"
- Customer Specified
- 10 Gal
- 105 Gal
- 130 Gal
- 158 Gal
- 1600 Gal
- 165 Gal
- 18 Gal
- 20 Gal
- 225 Gal
- 230 Gal
- 250 Gal
- 30 Gal
- 310 Gal
- 38 Gal
- 410 Gal
- 460 Gal
- 5 Gal
- 525 Gal
- 60 Gal
- 610 Gal
- 740 Gal
- 810 Gal
- 85 Gal
- Cone
- Cone Bottom
- Flanged and Dished
- Flat
- Slope
- Slope Bottom
- 1-1/2" flush ball valve
- 1.5" Sanitary Drain
- 2" FNPT
- 3/4" Flush Valve Ferrule
- Flush with Bottom 2" FNPT
- Flush with Bottom 3" FNPT
- 1
- 3
- 1"
- 1/2"
- 3/4"
- 3/8"
- 5/8"
- 1"
- 1/2"
- 1/4"
- 3/4"
- 3/8"
- 5/16"
- 5/8"
1 HP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1 HP Variable Speed Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1 HP XP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP Air Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included.
1.5 HP Air Motor Geared Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90 degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP Variable Speed Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP Variable Speed Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP XP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1.5 HP XP Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1/2 HP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1/2 HP Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1/2 HP Variable Speed Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1/2 HP Variable Speed Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1/2 HP XP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
1/2 HP XP Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP Air Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included.
3/4 HP Air Motor Geared Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90 degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP Variable Speed Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP Variable Speed Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP XP Electric Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
3/4 HP XP Gear Drive Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90-degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!
4 HP Air Motor Bracket Mount Tote Mixer
IMC BMD direct drive bracket mount tote mixers are ideal for low to medium viscosity materials like emulsions solvents and aqueous solutions. The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included.
4 HP Air Motor Geared Bracket Mount Tote Mixer
IMC BMG gear drive bracket mount tote mixers are ideal for medium to heavy viscosity materials like ink, polymers and coating solutions. This gear driven rendition of the bracket mount mixer produces more torque by running at a lower speed, additionally the 90 degree design of the gearbox helps keep a low profile The expandable mounting bracket will fit totes that are 34″ to 48″ wide totes. The bracket mount design makes it easy to move mixers between totes. TEFC models include a cord, plug and switch. Explosion proof models must be wired by customers. Variable speed models have a speed controller that is prewired and mounted to the mixer. Shaft and 3 blade propellers are included. Other options are available, contact us for a quote!