Drum Mixers
- High Shear High Speed
- Low Shear
- Rotor-Stator
- Rushton and Radial Turbine
- .75 to 4 HP Lab Units
- Pilot Units - Post Mount
- Blade Holding Plates
- Bracket
- Couplings
- Dispersion Blade Adapter Shaft
- Stainless Steel Shaft
- 3 Blade
- 4 Blade
- Angle Slot
- Emulser
- General Purpose
- HDF
- High Efficiency
- HSC
- HSF
- HSG
- Hydrofoil
- Radial Flow
- Split Hub 2 Piece
- UHSF
- Bracket Mount
- Bung Entering
- Clamp Mount
- Drum Lid
- Flange
- Heavy Duty Ring Mount
- IBC Tote Lid
- Plate
- Post
- Ring Mount
- Toggle Clamp
- Tri-Clamp
- 0.25
- 0.33
- 0.5
- 0.75
- 1
- 1.5
- 10
- 2
- 3
- 4
- 5
- 7.5
- No
- Yes
- No
- Yes
- Air
- ODP
- TEFC
- XP-TEFC
- .625"
- 0-2.5
- 0.25 in
- 0.312 in.
- 0.375 in.
- 0.5 in.
- 0.75"
- 1.25"
- 1.5"
- 1.63"
- 1"
- 2.5"
- 2"
- 304 SS
- 316 SS
- Carbon Steel
- 2 Blade Propeller
- 3 Blade Axial
- Angled Slot Rotor Stator
- BBO
- HSF
- Propeller
- VHE
- 304 SS
- 316 SS
- 319-Al
- 1.5"
- 10"
- 100"
- 11"
- 12"
- 13"
- 14"
- 15"
- 16"
- 17"
- 18"
- 19 in
- 2.5"
- 2"
- 20"
- 21"
- 22"
- 23 in
- 24"
- 25 in
- 26"
- 27 in
- 28"
- 29 in.
- 3.5"
- 3"
- 30"
- 32"
- 34"
- 36"
- 38"
- 4.5"
- 4"
- 40"
- 44"
- 45"
- 48"
- 5.5"
- 5"
- 50"
- 52"
- 6 in.
- 6"
- 60"
- 7"
- 70"
- 8"
- 80"
- 9"
- 90"
- Bolt On
- Keyed w. Set Screws
- Set Screw
- 1
- 2
- 3
- 4
- Cl1-Div1-GrC,D
- IC411
- IP54
- IP55
- IP65
- IP65 Stainless
- N/A
- Stainless Steel
- Steel
- 0.25"
- 0.5"
- 0.625"
- Customer Specified
- 10 Gal
- 105 Gal
- 130 Gal
- 158 Gal
- 1600 Gal
- 165 Gal
- 18 Gal
- 20 Gal
- 225 Gal
- 230 Gal
- 250 Gal
- 30 Gal
- 310 Gal
- 38 Gal
- 410 Gal
- 460 Gal
- 5 Gal
- 525 Gal
- 60 Gal
- 610 Gal
- 740 Gal
- 810 Gal
- 85 Gal
- Cone
- Cone Bottom
- Flanged and Dished
- Flat
- Slope
- Slope Bottom
- 1-1/2" flush ball valve
- 1.5" Sanitary Drain
- 2" FNPT
- 3/4" Flush Valve Ferrule
- Flush with Bottom 2" FNPT
- Flush with Bottom 3" FNPT
- 1
- 3
- 1"
- 1/2"
- 3/4"
- 3/8"
- 5/8"
- 1"
- 1/2"
- 1/4"
- 3/4"
- 3/8"
- 5/16"
- 5/8"
1 HP Bracket Mount Drum Mixers
IMC BMB gear drive, bracket mount drum mixers are used best with medium to heavy viscosity materials. This model was designed to be rugged and to fit 30–55-gallon drums (18–31-inch diameter). These units are very portable and include stainless steel shaft and impellers. Variable speed models include a prewired speed controller and is mounted on the motor. Other options are available, contact us for a quote!
1 HP Direct Drive Bung Mount Mixer
IMC DBE direct drive bung mount drum lid mixer is ideal for mixing low to medium viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. This bung entering design allows it our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1 HP Gear Drive Bung Mount Mixer
IMC DBEG gear drive bung mount drum lid mixer is ideal for mixing medium to high viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. The geared design provides a strong 5:1 gear ratio to help produce more torque for those tough jobs only IMC mixers can handle. This bung entering design allows our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1 HP Variable Speed Bracket Mount Drum Mixers
IMC BMB gear drive, bracket mount drum mixers are used best with medium to heavy viscosity materials. This model was designed to be rugged and to fit 30–55-gallon drums (18–31-inch diameter). These units are very portable and include stainless steel shaft and impellers. Variable speed models include a prewired speed controller and is mounted on the motor. Other options are available, contact us for a quote!
1 HP Variable Speed Direct Drive Bung Mount Mixer
IMC DBE direct drive bung mount drum lid mixer is ideal for mixing low to medium viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. This bung entering design allows it our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1 HP Variable Speed Gear Drive Bung Mount Mixer
IMC DBEG gear drive bung mount drum lid mixer is ideal for mixing medium to high viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. The geared design provides a strong 5:1 gear ratio to help produce more torque for those tough jobs only IMC mixers can handle. This bung entering design allows our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1 HP XP Direct Drive Bung Mount Mixer
IMC DBE direct drive bung mount drum lid mixer is ideal for mixing low to medium viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. This bung entering design allows it our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1 HP XP Gear Drive Bung Mount Mixer
IMC DBEG gear drive bung mount drum lid mixer is ideal for mixing medium to high viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. The geared design provides a strong 5:1 gear ratio to help produce more torque for those tough jobs only IMC mixers can handle. This bung entering design allows our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1.5 HP Air Motor Bracket Mount Drum Mixers
IMC BMB gear drive, bracket mount drum mixers are used best with medium to heavy viscosity materials. This model was designed to be rugged and to fit 30–55-gallon drums (18–31-inch diameter). These units are very portable and include stainless steel shaft and impellers. Variable speed models include a prewired speed controller and is mounted on the motor. Other options are available, contact us for a quote!
1.5 HP Air Motor Direct Drive Bung Mount Mixer
IMC DBE direct drive bung mount drum lid mixer is ideal for mixing low to medium viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. This bung entering design allows it our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1.5 HP Air Motor Gear Drive Bung Mount Mixer
IMC DBEG gear drive bung mount drum lid mixer is ideal for mixing medium to high viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. The geared design provides a strong 5:1 gear ratio to help produce more torque for those tough jobs only IMC mixers can handle. This bung entering design allows our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1/2 HP Bracket Mount Drum Mixers
IMC BMB gear drive, bracket mount drum mixers are used best with medium to heavy viscosity materials. This model was designed to be rugged and to fit 30–55-gallon drums (18–31-inch diameter). These units are very portable and include stainless steel shaft and impellers. Variable speed models include a prewired speed controller and is mounted on the motor. Other options are available, contact us for a quote!
1/2 HP Direct Drive Bung Mount Mixer
IMC DBE direct drive bung mount drum lid mixer is ideal for mixing low to medium viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. This bung entering design allows it our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!
1/2 HP Gear Drive Bung Mount Mixer
IMC DBEG gear drive bung mount drum lid mixer is ideal for mixing medium to high viscosity materials and to re-suspend settled materials. This model is designed to thread onto a 2″ NPT bung opening. The geared design provides a strong 5:1 gear ratio to help produce more torque for those tough jobs only IMC mixers can handle. This bung entering design allows our mixer to fit on almost any drum. All models come equipped with Model BBO opening blades to fit into drum openings. TEFC models include cord, switch, and a plug. VFD models include a speed controller mounted on the motor. Explosion proof models have motor leads only. Other options are available, contact us for a quote!