Stainless Steel Shaft
✔ 316/304 Stainless Steel
✔ Polished and Ground
✔ Used with any IMC Blade or Impeller that mount with set screws
✔ Manufactured for coupler or chucking mounting
- High Shear High Speed
- Low Shear
- Rotor-Stator
- Rushton and Radial Turbine
- .75 to 4 HP Lab Units
- Pilot Units - Post Mount
- Blade Holding Plates
- Bracket
- Couplings
- Dispersion Blade Adapter Shaft
- Stainless Steel Shaft
- 3 Blade
- 4 Blade
- Angle Slot
- Emulser
- General Purpose
- HDF
- High Efficiency
- HSC
- HSF
- HSG
- Hydrofoil
- Radial Flow
- Split Hub 2 Piece
- UHSF
- Bracket Mount
- Bung Entering
- Clamp Mount
- Drum Lid
- Flange
- Heavy Duty Ring Mount
- IBC Tote Lid
- Plate
- Post
- Ring Mount
- Toggle Clamp
- Tri-Clamp
- 0.25
- 0.33
- 0.5
- 0.75
- 1
- 1.5
- 10
- 2
- 3
- 4
- 5
- 7.5
- No
- Yes
- No
- Yes
- Air
- ODP
- TEFC
- XP-TEFC
- .625"
- 0-2.5
- 0.25 in
- 0.312 in.
- 0.375 in.
- 0.5 in.
- 0.75"
- 1.25"
- 1.5"
- 1.63"
- 1"
- 2.5"
- 2"
- 304 SS
- 316 SS
- Carbon Steel
- 2 Blade Propeller
- 3 Blade Axial
- Angled Slot Rotor Stator
- BBO
- HSF
- Propeller
- VHE
- 304 SS
- 316 SS
- 319-Al
- 1.5"
- 10"
- 100"
- 11"
- 12"
- 13"
- 14"
- 15"
- 16"
- 17"
- 18"
- 19 in
- 2.5"
- 2"
- 20"
- 21"
- 22"
- 23 in
- 24"
- 25 in
- 26"
- 27 in
- 28"
- 29 in.
- 3.5"
- 3"
- 30"
- 32"
- 34"
- 36"
- 38"
- 4.5"
- 4"
- 40"
- 44"
- 45"
- 48"
- 5.5"
- 5"
- 50"
- 52"
- 6 in.
- 6"
- 60"
- 7"
- 70"
- 8"
- 80"
- 9"
- 90"
- Bolt On
- Keyed w. Set Screws
- Set Screw
- 1
- 2
- 3
- 4
- Cl1-Div1-GrC,D
- IC411
- IP54
- IP55
- IP65
- IP65 Stainless
- N/A
- Stainless Steel
- Steel
- 0.25"
- 0.5"
- 0.625"
- Customer Specified
- 10 Gal
- 105 Gal
- 130 Gal
- 158 Gal
- 1600 Gal
- 165 Gal
- 18 Gal
- 20 Gal
- 225 Gal
- 230 Gal
- 250 Gal
- 30 Gal
- 310 Gal
- 38 Gal
- 410 Gal
- 460 Gal
- 5 Gal
- 525 Gal
- 60 Gal
- 610 Gal
- 740 Gal
- 810 Gal
- 85 Gal
- Cone
- Cone Bottom
- Flanged and Dished
- Flat
- Slope
- Slope Bottom
- 1-1/2" flush ball valve
- 1.5" Sanitary Drain
- 2" FNPT
- 3/4" Flush Valve Ferrule
- Flush with Bottom 2" FNPT
- Flush with Bottom 3" FNPT
- 1
- 3
- 1"
- 1/2"
- 3/4"
- 3/8"
- 5/8"
- 1"
- 1/2"
- 1/4"
- 3/4"
- 3/8"
- 5/16"
- 5/8"
1″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!
1/2″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!
1/4″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!
3/4″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!
3/8″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!
5/16″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!
5/8″ Diameter Stainless Steel Shaft
IMC shafts are precision machined at our state of the art facilities. Our shafts are machined to tight tolerances to be compatibale with our mixers. If you can’t find the exact shaft you need, contact us for a quote!