HSG
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Recommended maximum fluid viscosity is 50,000 cPs.
- High Shear High Speed
- Low Shear
- Rotor-Stator
- Rushton and Radial Turbine
- .75 to 4 HP Lab Units
- Pilot Units - Post Mount
- Blade Holding Plates
- Bracket
- Couplings
- Dispersion Blade Adapter Shaft
- Stainless Steel Shaft
- 3 Blade
- 4 Blade
- Angle Slot
- Emulser
- General Purpose
- HDF
- High Efficiency
- HSC
- HSF
- HSG
- Hydrofoil
- Radial Flow
- Split Hub 2 Piece
- UHSF
- Bracket Mount
- Bung Entering
- Clamp Mount
- Drum Lid
- Flange
- Heavy Duty Ring Mount
- IBC Tote Lid
- Plate
- Post
- Ring Mount
- Toggle Clamp
- Tri-Clamp
- 0.25
- 0.33
- 0.5
- 0.75
- 1
- 1.5
- 10
- 2
- 3
- 4
- 5
- 7.5
- No
- Yes
- No
- Yes
- Air
- ODP
- TEFC
- XP-TEFC
- .625"
- 0-2.5
- 0.25 in
- 0.312 in.
- 0.375 in.
- 0.5 in.
- 0.75"
- 1.25"
- 1.5"
- 1.63"
- 1"
- 2.5"
- 2"
- 304 SS
- 316 SS
- Carbon Steel
- 2 Blade Propeller
- 3 Blade Axial
- Angled Slot Rotor Stator
- BBO
- HSF
- Propeller
- VHE
- 304 SS
- 316 SS
- 319-Al
- 1.5"
- 10"
- 100"
- 11"
- 12"
- 13"
- 14"
- 15"
- 16"
- 17"
- 18"
- 19 in
- 2.5"
- 2"
- 20"
- 21"
- 22"
- 23 in
- 24"
- 25 in
- 26"
- 27 in
- 28"
- 29 in.
- 3.5"
- 3"
- 30"
- 32"
- 34"
- 36"
- 38"
- 4.5"
- 4"
- 40"
- 44"
- 45"
- 48"
- 5.5"
- 5"
- 50"
- 52"
- 6 in.
- 6"
- 60"
- 7"
- 70"
- 8"
- 80"
- 9"
- 90"
- Bolt On
- Keyed w. Set Screws
- Set Screw
- 1
- 2
- 3
- 4
- Cl1-Div1-GrC,D
- IC411
- IP54
- IP55
- IP65
- IP65 Stainless
- N/A
- Stainless Steel
- Steel
- 0.25"
- 0.5"
- 0.625"
- Customer Specified
- 10 Gal
- 105 Gal
- 130 Gal
- 158 Gal
- 1600 Gal
- 165 Gal
- 18 Gal
- 20 Gal
- 225 Gal
- 230 Gal
- 250 Gal
- 30 Gal
- 310 Gal
- 38 Gal
- 410 Gal
- 460 Gal
- 5 Gal
- 525 Gal
- 60 Gal
- 610 Gal
- 740 Gal
- 810 Gal
- 85 Gal
- Cone
- Cone Bottom
- Flanged and Dished
- Flat
- Slope
- Slope Bottom
- 1-1/2" flush ball valve
- 1.5" Sanitary Drain
- 2" FNPT
- 3/4" Flush Valve Ferrule
- Flush with Bottom 2" FNPT
- Flush with Bottom 3" FNPT
- 1
- 3
- 1"
- 1/2"
- 3/4"
- 3/8"
- 5/8"
- 1"
- 1/2"
- 1/4"
- 3/4"
- 3/8"
- 5/16"
- 5/8"
HSG-High Vane Dispersion Blade, 10″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 12″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 14″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 16″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 18″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 20″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 22″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 24″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 3″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 4″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 5″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 6″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!
HSG-High Vane Dispersion Blade, 8″ Diameter
The HSG style, high vane blade, generates a high pumping action which tends to mix the entire batch efficiently, resulting in high-speed blending with low shear, but with excellent flow and circulation. It is used in heavy bodied mixes that require higher shear as obtained from paddle agitation. Other options are available, contact us for a quote!